Availability: | |
---|---|
The barrier strip filtered terminal block is designed to provide EMI/RFI filtering of AC and DC power lines and control lines. These filtered terminal blocks are available in various sizes with a terminal for soldering or spade lugs.
● Pin pitch range: 0.635-1.1 mm
● Position size: 2-30
● Clamp screws are best for bare wire applications.
● Acceptable wiring range: 10-30 US wire gauge (depending on the type).
● A full range of accessories, including jumpers, quick connection male terminals, and some safety covers.
● Provide binding head and wire clip screws; binding head screws are usually used with hardware such as QC male end and jumper.
● Common contact styles provide double-layer barriers and three-layer barriers: PCB pins, extended PCB pins, insulated extended PCB pins, winding, insulated winding, welding turret, plug-in welding turret, quick connection, insertion fast connection, and no punch-through.
With its simple, intuitive, and solid structure, the barrier terminal blocks are widely used in many electronic and electrical industries such as security monitoring, power supply, frequency converter, motor, motion control, injection molding machine control, programmable power supply, sensor control board, LED lamp lighting, industrial control equipment, power equipment, instrumentation and so on.
● Machine control
● Power supply
● Test and measurement
● Automation equipment
● Security/Alarm equipment
● HVAC control
● Garage door opener
● Furnace, water heater, boiler
● Industrial controls
● Instrumentation
● EDP equipment
Sun is top 10 barrier terminal block manufacturers in China, offering high quality and low price barrier strip terminal block, barrier terminal block connector, and barrier strip connector.
Model | EXTB250 |
Material | |
Pitch | 12.0 mm |
Screws | M4.0,Steel ,Ni plated |
Pin header | Brass, Ni Plated |
Housing | PA66 UL94V-0 |
Electrical | |
Rated voltage | 300V |
Rated current | 25A |
Withstanding voltage | AC2000V/1 Min |
Wire range | 22-12AWG |
Contact resistance | 20mΩ |
Insulation resistance | 500mΩ/DC500V |
Mechanical | |
Temp range | -40℃~+105℃ |
Torque | 1.2Nm(10.53Lbin) |
The barrier strip filtered terminal block is designed to provide EMI/RFI filtering of AC and DC power lines and control lines. These filtered terminal blocks are available in various sizes with a terminal for soldering or spade lugs.
● Pin pitch range: 0.635-1.1 mm
● Position size: 2-30
● Clamp screws are best for bare wire applications.
● Acceptable wiring range: 10-30 US wire gauge (depending on the type).
● A full range of accessories, including jumpers, quick connection male terminals, and some safety covers.
● Provide binding head and wire clip screws; binding head screws are usually used with hardware such as QC male end and jumper.
● Common contact styles provide double-layer barriers and three-layer barriers: PCB pins, extended PCB pins, insulated extended PCB pins, winding, insulated winding, welding turret, plug-in welding turret, quick connection, insertion fast connection, and no punch-through.
With its simple, intuitive, and solid structure, the barrier terminal blocks are widely used in many electronic and electrical industries such as security monitoring, power supply, frequency converter, motor, motion control, injection molding machine control, programmable power supply, sensor control board, LED lamp lighting, industrial control equipment, power equipment, instrumentation and so on.
● Machine control
● Power supply
● Test and measurement
● Automation equipment
● Security/Alarm equipment
● HVAC control
● Garage door opener
● Furnace, water heater, boiler
● Industrial controls
● Instrumentation
● EDP equipment
Sun is top 10 barrier terminal block manufacturers in China, offering high quality and low price barrier strip terminal block, barrier terminal block connector, and barrier strip connector.
Model | EXTB250 |
Material | |
Pitch | 12.0 mm |
Screws | M4.0,Steel ,Ni plated |
Pin header | Brass, Ni Plated |
Housing | PA66 UL94V-0 |
Electrical | |
Rated voltage | 300V |
Rated current | 25A |
Withstanding voltage | AC2000V/1 Min |
Wire range | 22-12AWG |
Contact resistance | 20mΩ |
Insulation resistance | 500mΩ/DC500V |
Mechanical | |
Temp range | -40℃~+105℃ |
Torque | 1.2Nm(10.53Lbin) |