Availability: | |
---|---|
China Barrier strips can accommodate a broad range of wire sizes and provide reliable connections. The term “contact” refers to the wire attached to the barrier and the contact pitch refers to the distance between each contact, measured from the center of each opening or hole. The barrier strip terminal block is designed to provide EMI/RFI filtering of AC and DC power lines and control lines. These filtered terminal blocks are available in various sizes with a terminal for soldering or spade lugs.
● UL recognized and CSA approved for DC voltages
● The filter element provides high insertion loss for EMI/RFI filtering of AC and DC power and control lines.
● Rugged construction provides protection to filtering element; especially useful for repeated changes in wiring or field connections
● 2 to 6 terminals available (combine if a larger number of terminals needed)
● Cost-effective solution for industrial interconnection EMI filtering problems
● Termination options available: straight lead, male or female disconnects, and value-added wiring
● Filtering power supplies in telecommunications equipment
● Metering
● Industrial controls
● Instrumentation
● EDP equipment
Sun is top 10 barrier terminal block manufacturers in China, offering high quality and low price barrier strip terminal block, barrier terminal block connector, and barrier strip connector.
Model | EX10C-8.5 |
Material | |
Pitch | 8.5 mm |
Screws | M3.0,Steel ,Ni plated |
Pin header | Copper alloy, Ni Plated |
Housing | PA66 UL94V-0 |
Electrical | |
Rated voltage | 300V |
Rated current | 20A |
Withstanding voltage | AC2000V/1 Min |
Wire range | 22-12AWG |
Contact resistance | 20mΩ |
Insulation resistance | 500mΩ/DC500V |
Mechanical | |
Temp range | -40℃~+105℃ |
Torque | 1.0Nm(8.85Lbin) |
China Barrier strips can accommodate a broad range of wire sizes and provide reliable connections. The term “contact” refers to the wire attached to the barrier and the contact pitch refers to the distance between each contact, measured from the center of each opening or hole. The barrier strip terminal block is designed to provide EMI/RFI filtering of AC and DC power lines and control lines. These filtered terminal blocks are available in various sizes with a terminal for soldering or spade lugs.
● UL recognized and CSA approved for DC voltages
● The filter element provides high insertion loss for EMI/RFI filtering of AC and DC power and control lines.
● Rugged construction provides protection to filtering element; especially useful for repeated changes in wiring or field connections
● 2 to 6 terminals available (combine if a larger number of terminals needed)
● Cost-effective solution for industrial interconnection EMI filtering problems
● Termination options available: straight lead, male or female disconnects, and value-added wiring
● Filtering power supplies in telecommunications equipment
● Metering
● Industrial controls
● Instrumentation
● EDP equipment
Sun is top 10 barrier terminal block manufacturers in China, offering high quality and low price barrier strip terminal block, barrier terminal block connector, and barrier strip connector.
Model | EX10C-8.5 |
Material | |
Pitch | 8.5 mm |
Screws | M3.0,Steel ,Ni plated |
Pin header | Copper alloy, Ni Plated |
Housing | PA66 UL94V-0 |
Electrical | |
Rated voltage | 300V |
Rated current | 20A |
Withstanding voltage | AC2000V/1 Min |
Wire range | 22-12AWG |
Contact resistance | 20mΩ |
Insulation resistance | 500mΩ/DC500V |
Mechanical | |
Temp range | -40℃~+105℃ |
Torque | 1.0Nm(8.85Lbin) |