Availability: | |
---|---|
9.5mm Barrier Terminal Block Connector is designed to simplify wiring work by reducing splicing, preventing current leaks and short circuits, and increasing insulation. Available in a variety of densities, these 9.5mm Barrier Terminal Block Connector can be found in applications ranging from industrial controls to switching systems. The 9.5mm Barrier Terminal Block Connector is available with various connection technologies and as hybrid versions. Combine the connection technologies and benefit from the individual advantages for the control cabinet and field connection side. All features, materials, and environmental specifications can be found in the datasheet.
Choosing the right type of connector for your application may seem trivial but, in fact, is more complex than you may realize. The aspects of terminal blocks that need to be considered are typically current requirements, voltage requirements, the wire being used, mechanical strength, and the environment.
Current requirements are arguably the most important aspect to consider because pushing too much current through a terminal block can result in overheating and, therefore, the destruction of the terminal block. When looking for a terminal block, be sure that the chosen block can, in fact, handle the current that you expect to use plus 50 percent more. For example, if an expected current of 2 A is to be drawn from a block, then a terminal block with a current rating of 3 A would be sufficient.
Just like the current draw, the voltage also needs to be taken into account. The voltage causes problems with dielectric breakdown such that a voltage too high for a terminal block could cause current leakage between adjacent terminal blocks. However, high voltage requirements are often rare in design, which is why voltage considerations are typically ignored for voltages under 100 V. However, it is still important that this figure is checked before a terminal block is chosen!
Not all wires are equal, and each wire type has its own advantages and disadvantages. For example, when choosing a terminal block for a cable, be sure to know the size of the cable (can it physically fit into the terminal block?) as well as if it’s single-core or multi-core. Multi-core wire does very well in screw terminals, whereas single-core wire does well in push-fit connectors.
The environment is a very important aspect to consider when choosing a terminal block. Some terminal blocks may be mechanically strong and able to handle high currents, but if the connection is being used in a naval environment, then the salty air could be detrimental to the metal contacts. The environment could also have wide temperate swings or contain mechanical vibrations, which make screw terminations unreliable.
With its simple, intuitive, and solid structure, the barrier terminal blocks are widely used in many electronic and electrical industries such as security monitoring, power supply, frequency converter, motor, motion control, injection molding machine control, programmable power supply, sensor control board, LED lamp lighting, industrial control equipment, power equipment, instrumentation and so on.
● Machine control
● Power supply
● Test and measurement
● Automation equipment
● Security/Alarm equipment
● HVAC control
● Garage door opener
● Furnace, water heater, boiler
● Industrial controls
● Instrumentation
● EDP equipment
Sun is top10 barrier terminal block manufacturers in China, offering high quality barrier strip terminal block and barrier strip connector.
Model | EX46 |
Material | |
Pitch | 9.5 mm |
Screws | M4.0,Steel ,Ni plated |
Pin header | Brass, Tin Plated |
Housing | PA66 UL94V-0 |
Electrical | |
Rated voltage | 300V |
Rated current | 20A |
Withstanding voltage | AC2000V/1 Min |
Wire range | 22-12AWG |
Contact resistance | 20mΩ |
Insulation resistance | 500mΩ/DC500V |
Mechanical | |
Temp range | -40℃~+105℃ |
Torque | 1.2Nm(10.6Lbin) |
9.5mm Barrier Terminal Block Connector is designed to simplify wiring work by reducing splicing, preventing current leaks and short circuits, and increasing insulation. Available in a variety of densities, these 9.5mm Barrier Terminal Block Connector can be found in applications ranging from industrial controls to switching systems. The 9.5mm Barrier Terminal Block Connector is available with various connection technologies and as hybrid versions. Combine the connection technologies and benefit from the individual advantages for the control cabinet and field connection side. All features, materials, and environmental specifications can be found in the datasheet.
Choosing the right type of connector for your application may seem trivial but, in fact, is more complex than you may realize. The aspects of terminal blocks that need to be considered are typically current requirements, voltage requirements, the wire being used, mechanical strength, and the environment.
Current requirements are arguably the most important aspect to consider because pushing too much current through a terminal block can result in overheating and, therefore, the destruction of the terminal block. When looking for a terminal block, be sure that the chosen block can, in fact, handle the current that you expect to use plus 50 percent more. For example, if an expected current of 2 A is to be drawn from a block, then a terminal block with a current rating of 3 A would be sufficient.
Just like the current draw, the voltage also needs to be taken into account. The voltage causes problems with dielectric breakdown such that a voltage too high for a terminal block could cause current leakage between adjacent terminal blocks. However, high voltage requirements are often rare in design, which is why voltage considerations are typically ignored for voltages under 100 V. However, it is still important that this figure is checked before a terminal block is chosen!
Not all wires are equal, and each wire type has its own advantages and disadvantages. For example, when choosing a terminal block for a cable, be sure to know the size of the cable (can it physically fit into the terminal block?) as well as if it’s single-core or multi-core. Multi-core wire does very well in screw terminals, whereas single-core wire does well in push-fit connectors.
The environment is a very important aspect to consider when choosing a terminal block. Some terminal blocks may be mechanically strong and able to handle high currents, but if the connection is being used in a naval environment, then the salty air could be detrimental to the metal contacts. The environment could also have wide temperate swings or contain mechanical vibrations, which make screw terminations unreliable.
With its simple, intuitive, and solid structure, the barrier terminal blocks are widely used in many electronic and electrical industries such as security monitoring, power supply, frequency converter, motor, motion control, injection molding machine control, programmable power supply, sensor control board, LED lamp lighting, industrial control equipment, power equipment, instrumentation and so on.
● Machine control
● Power supply
● Test and measurement
● Automation equipment
● Security/Alarm equipment
● HVAC control
● Garage door opener
● Furnace, water heater, boiler
● Industrial controls
● Instrumentation
● EDP equipment
Sun is top10 barrier terminal block manufacturers in China, offering high quality barrier strip terminal block and barrier strip connector.
Model | EX46 |
Material | |
Pitch | 9.5 mm |
Screws | M4.0,Steel ,Ni plated |
Pin header | Brass, Tin Plated |
Housing | PA66 UL94V-0 |
Electrical | |
Rated voltage | 300V |
Rated current | 20A |
Withstanding voltage | AC2000V/1 Min |
Wire range | 22-12AWG |
Contact resistance | 20mΩ |
Insulation resistance | 500mΩ/DC500V |
Mechanical | |
Temp range | -40℃~+105℃ |
Torque | 1.2Nm(10.6Lbin) |