TEL: +86-0574-87290036   Email: cherry@sun-electrics.com

Specializes in the production of terminal blocks and industrial electrical connection products.

China Barrier Terminal Block Connector 9.5mm
You are here: Home » Products » Barrier Terminal Blocks » China Barrier Terminal Block Connector 9.5mm

Product Categories

China Barrier Terminal Block Connector 9.5mm

China Barrier Terminal Block Connector 9.5mm is used to make multiple electrical connections in one location. They usually have terminals that allow the wires to be secured by tightening screws. A China barrier terminal block contains the wires to prevent electrical shorts. China Barrier Terminal Block Connector 9.5mm is frequently used in applications such as industrial controls, instrumentation, power supplies, consumer electronics telecom equipment, and transportation.

  • EX9500S

With the China Barrier Terminal Block Connector 9.5mm from SUN, you can connect conductors safely and conveniently. In combination with Push-in connection technology, the screw connection principle with spring-guided screw makes wiring quick and easy. The SUN China Barrier Terminal Block Connector 9.5mm is available for DIN rail or direct mounting. As China barrier terminal block manufacturers, SUN offers an electrical terminal block to meet the needs of most any application. A SUN China barrier terminal block can be found to support either wire-to-board or wire-to-wire configurations. 


How to decide the China barrier terminal block connector for you?


Choosing the right type of connector for your application may seem trivial but, in fact, is more complex than you may realize. The aspects of terminal blocks that need to be considered are typically current requirements, voltage requirements, the wire being used, mechanical strength, and the environment.


1. Current requirement

Current requirements are arguably the most important aspect to consider because pushing too much current through a terminal block can result in overheating and, therefore, the destruction of the terminal block. When looking for a terminal block, be sure that the chosen block can, in fact, handle the current that you expect to use plus 50 percent more. For example, if an expected current of 2 A is to be drawn from a block, then a terminal block with a current rating of 3 A would be sufficient.


2. Voltage requirements

Just like the current draw, the voltage also needs to be taken into account. The voltage causes problems with dielectric breakdown such that a voltage too high for a terminal block could cause current leakage between adjacent terminal blocks. However, high voltage requirements are often rare in design, which is why voltage considerations are typically ignored for voltages under 100 V. However, it is still important that this figure is checked before a terminal block is chosen!


3. Wire being used

Not all wires are equal, and each wire type has its own advantages and disadvantages. For example, when choosing a terminal block for a cable, be sure to know the size of the cable (can it physically fit into the terminal block?) as well as if it’s single-core or multi-core. Multi-core wire does very well in screw terminals, whereas single-core wire does well in push-fit connectors.


4. Environmental/mechanical strength

The environment is a very important aspect to consider when choosing a terminal block. Some terminal blocks may be mechanically strong and able to handle high currents, but if the connection is being used in a naval environment, then the salty air could be detrimental to the metal contacts. The environment could also have wide temperate swings or contain mechanical vibrations, which make screw terminations unreliable.



Model

EX9500S

Material

Pitch

9.5 mm

Screws

M4.0Steel ,Ni plated

Pin header

Brass, Tin   Plated

Housing

PA66 UL94V-0

Electrical

Rated   voltage

300V

Rated   current

20A

Withstanding   voltage

AC2000V/1   Min

Wire range

22-12AWG

Contact   resistance

20m

Insulation   resistance

500m/DC500V

Mechanical

Temp range

-40~+105

Torque

1.2Nm(10.6Lbin)

barrier-terminal-block-EX9500S

Sun Electric Co., Ltd
Founded in 2011, Sun Electric Co., Ltd specializes in the production of terminal blocks and industrial electrical connection products.

Useful Links

Product Categories

Get In Touch
 Add: Wufeng Industrial Zone, Qiaotou Town, Cixi City, Ningbo City, Zhejiang Province, China
 Tel: +86-0574-87290036
 E-mail: cherry@sun-electrics.com
Copyright  Sun Electric Co., Ltd. All rights reserved. Sitemap