Availability: | |
---|---|
China push-in terminal blocks with strain relief are available in 2 - 24 poles, with a PIN spacing of 5.08 mm. They are able to handle high voltages of up to 300V using large current levels of up to 15 Amps. Each connector is very adaptive and easily accepts from 28 to 14 AWG wire. The connector is solidly constructed and has been rigorously tested and is approved by the UL/CSA and IMQ/VDE.
1. The shell is made of thermosetting plastics.
2. Copper conductor, good electrical conductivity, nickel-plated anti-corrosion on the exterior.
3. Dustproof transparent plastic protective cover, durable.
4. The product structure is simple, easy to install, with OT, UT end-use, the wiring is firm and reliable, can be used for high-current wiring in various electrical devices.
5. This series also has a dust cover and PVC white mark.
6. This series of products can be directly punched and installed on the bottom plate.
Sun is top 10 terminal block manufacturers in China, providing high-quality and low price pluggable terminal block, pluggable terminal strip, and pluggable terminal block connector.
Mode | EX2EDGKR-5.0/5.08 |
Material | |
Pitch | 5.00/5.08 mm |
Poles | 2~24P |
Screws/Nut | M2.5,Steel ,Zinc plated |
Contact | Phosphor bronze Ni Plated |
Wire Cage/Pin header | Brass, Ni Plated |
Housing | PA66, UL94V-0 |
Electrical | |
Rated voltage | 300V |
Rated current | 15A |
Withstanding voltage | AC1500V/1 Min |
Wire range | 28-14AWG |
Mechanical | |
Temp range | -30℃~+120℃ |
Max soldering | +250℃ 5 Sec |
Torque | 0.5Nm(4.43Lbin) |
Strip length | 7~8mm |
China push-in terminal blocks with strain relief are available in 2 - 24 poles, with a PIN spacing of 5.08 mm. They are able to handle high voltages of up to 300V using large current levels of up to 15 Amps. Each connector is very adaptive and easily accepts from 28 to 14 AWG wire. The connector is solidly constructed and has been rigorously tested and is approved by the UL/CSA and IMQ/VDE.
1. The shell is made of thermosetting plastics.
2. Copper conductor, good electrical conductivity, nickel-plated anti-corrosion on the exterior.
3. Dustproof transparent plastic protective cover, durable.
4. The product structure is simple, easy to install, with OT, UT end-use, the wiring is firm and reliable, can be used for high-current wiring in various electrical devices.
5. This series also has a dust cover and PVC white mark.
6. This series of products can be directly punched and installed on the bottom plate.
Sun is top 10 terminal block manufacturers in China, providing high-quality and low price pluggable terminal block, pluggable terminal strip, and pluggable terminal block connector.
Mode | EX2EDGKR-5.0/5.08 |
Material | |
Pitch | 5.00/5.08 mm |
Poles | 2~24P |
Screws/Nut | M2.5,Steel ,Zinc plated |
Contact | Phosphor bronze Ni Plated |
Wire Cage/Pin header | Brass, Ni Plated |
Housing | PA66, UL94V-0 |
Electrical | |
Rated voltage | 300V |
Rated current | 15A |
Withstanding voltage | AC1500V/1 Min |
Wire range | 28-14AWG |
Mechanical | |
Temp range | -30℃~+120℃ |
Max soldering | +250℃ 5 Sec |
Torque | 0.5Nm(4.43Lbin) |
Strip length | 7~8mm |